Single-gas Detectors
  Multi-gas Detectors
  Fixed Gas transmitters
  FG10S
  FG10
  Fixed Controllers
  Gas Sensor
Home > Products

l The instrument can be equipped with dozens of kinds of sensors such as electrochemical, catalytic, non-dispersive infrared (NDIR) and photo-ionization detector (PID) sensors in order to meet users’ different demands;

l The instrument can not only display the concentration of a dangerous gas in real time but also calculate the TWA and STEL values of a toxic gas and display the results on the LCD as per corresponding instructions;

l The instrument possesses analog, digital and on/off signal outputs simultaneously;

l The ultra-large LCD screen is equipped with ultra-bright backlight, convenient for reading;

l  Its Protection Classification can exceed IP66;

l One key recovery function enables you to not worry about wrong operations.

Part No.

90005000-S1

Gas Detected

Ozone, O3

Sampling Method

Diffusion

Gas Sensor

Triple-electrode electrochemical sensor

Measure Range

0~30ppm    

Resolution

0.1ppm

Response Time

Less than 30 seconds

Power Supply

Voltage: (15~30)VDC, electricity: 50mA

Electric Interface

3/4’’NPT

Display

Displayed with large screen LCD

Alarm method

3-LED lights alarms

Signal Output

Analog signal(4~20)mA, loading resistance: 500Ω

Digital signal RS485 ModBus RTU communication protocol

On/off  signal: 3 relays

Wiring Method

Triple wire system; Power, GND, Signal

Protection Classification

IP66

Environment Temperature

-20℃~ 50℃

Environment Humidity

15%~ 95% relative humidity (standard)

Explosion-Proof

Ex d IIC T6

Size

209mm*133mm*110mm (length*width*height)

Weight

2.2 kg

Materials of the cases

Casting aluminum and stainless steel

Ozone - O3 

 

Hazard:                      Flammable       Non-Flammable, Oxidizer

Classification:          Health                Extremely toxic

Synonyms:                Triatomic oxygen

Exposure limits:       (OSHA) PEL\TWA: 0.1 ppm

                                    (ACGIH) STEL: 0.3 ppm

                                    (OSHA) IDLH: 5 ppm  

Industries:                 WWTP, Power Generation, Welding

       

Ozone is a non-flammable gas that is typically colorless to blue in color. It has a very pungent odor. It is a powerful oxidizer and should be kept away form all oxidizable materials both organic and inorganic. Ozone is typically formed around high-powered electrical equipment where sparking is evident. Ozone attacks the eyes and respiratory system and can cause pulmonary edema. Victims should be removed from the area immediately and given 100% oxygen.

       

Effects of Various O3 Levels  

Ozone Level in PPM                            Resulting Conditions on Humans

0.1                                                 OSHA Permissible Exposure Limit (PEL).

0.3                                                 OSHA Short Term Exposure Limit (STEL)

36                                                  Diarrhea, nausea, respiratory distress.

501                                                Lethal after 45 minutes

2000                                              Lethal after 1-3 minutes

   
Annix GmbH
Oberer Tiegel 4A 97249 Eisingen
Germany
Tel:049 9306 576023
沪ICP备14038069号
Home | Company Profile | Products | News | Information Center | Contact Us